Loop Earrings, Orange

€69.67
Tax included Shipped within 2-5 days

This Loop earrings with a little twist, perfect if you are looking for the joyful summer vibe all year long. Size: length 7cm. This design combines 3D technology with an artisanal approach. Inspired by teneriffe lace Francesca’s family items. The lace becomes the framework for a modern reinterpretation of this antique technique. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process items.

  • Polyamide 3D Printed, brass
  • Super Lightweight
  • Butterfly fastening for piercing earrings
  • Made in Italy
Size Guide
Size Guide
CLOTHES
MEASUREXS/34S/36M/38-40L/40-42
UK681012
USA46810
FRA36384042
Waist (cm)64687276
Chest (cm)81858993
Seat (cm)899397101
Inseam (cm)81828384


SHOES
FOOT IN INCHESFOOT IN CMUSAEuroUK
23.56395
24.16.539.55.5
24.87.5406
1025.48417
10¼25.78.541.57.5
10½269428
10¾27.39.542.59.5

How to Take Clothing Measurements

  1. Get a flexible measuring tape. These are often sold in craft stores
  2. Neck:
    • Measure around the base of the neck in inches.
    • Round up to the nearest half inch.
  3. Chest:
    • Wrap tape measure under armpits around fullest part of chest (usually right above nipples
  4. Sleeve:
    • Bend your elbow and rest your hand on your hip.
    • Have someone measure from the middle of the back of your neck to your wrist by putting the tape measure over your shoulder, around your elbow and to your wrist.
  5. Waist:
    • Wrap tape measure around where you normally wear your pants. Keep tape measure a little loose by keeping a finger between the tape measure and your waist.
  6. Inseam:
    • Put on a pair of shoes.Have someone measure from your crotch to back of the heel, where you want your pants to end.
  7. Hands:
    • Measure around the hand at the fullest part (exclude thumb). The number of inches shows the size of the glove.
Colours
  • Orange
Quantity
  Last items in stock

100% secure payments

Visionary doily design earrings. - This Circle Venice earrings studs punctuate the ear is a contemporary interpretation of the classic doily design. Is an everyday piece that you'll forget to have it on thanks to its super lightweight. This design combines 3D technology with an artisanal approach. Inspired by Teneriffe lace Francesca's family items. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy

Product Details

Loop earrings Orange
1 Item

Data sheet

Weight
3,6 grams a couple
Materials
Polyamide, brass

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Quick Compare

Product
Teneriffe earrings  Anima Blue Paolin 3d Teneriffe earrings medium, Anima Blue Teneriffe earrings, black Parrot earrings ER-27 ANIMA Paolin custom jewellery Parrot earrings, anima Parrot earrings ER-27 BLUE Paolin custom jewellery Parrot earrings, Blue
Availability
Price
€77.87
€77.05
€74.59
€74.59
Description

The iconic hoop earring bicame becolor and light up your day with some brass tone dazzle.  Perfect to be matched with a blouse or a blazer. With the Teneriffe style earrings on, you'll stand out while feeling comfortable. This design combines 3D technology with an artisanal approach. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process. Length 6,7, width 6,7cm

  • Polyamide 3D Printed, brass
  • Butterfly fastening for pierced ears
  • Made in Italy

This design combines 3D technology with an artisanal approach. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass.
  • Butterfly fastening for pierced ears.
  • Made in Italy.

Earrings in Polyamide 3D printed and hand-dyed. Variances of colours and layering are due to the 3D printing, polishing and the artisanal approach.

  • Polyamide 3D Printed, brass.
  • Butterfly fastening for pierced earrings.
  • Made in Italy.

Dreaming about wildlife in the Amazon rain forest? Why not try these drop earrings inspired by the parrots' wings? Earrings in Polyamide 3D printed and hand-dyed. Variances of colours and layering are due to the 3D printing, polishing and the artisanal approach. Length 8cm, with 3cm

  • Polyamide 3D Printed, brass
  • Butterfly fastening for pierced earrings
  • Made in Ital
Weight
10,5 grams a couple
Materials
Polyamide, brass Polyamide, brass Polyamide, brass Polyamide, brass

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Quick Compare

Product
Teneriffe earrings  Anima Blue Paolin 3d Teneriffe earrings medium, Anima Blue Teneriffe earrings, black Parrot earrings ER-27 ANIMA Paolin custom jewellery Parrot earrings, anima Parrot earrings ER-27 BLUE Paolin custom jewellery Parrot earrings, Blue
Availability
Price
€77.87
€77.05
€74.59
€74.59
Description

The iconic hoop earring bicame becolor and light up your day with some brass tone dazzle.  Perfect to be matched with a blouse or a blazer. With the Teneriffe style earrings on, you'll stand out while feeling comfortable. This design combines 3D technology with an artisanal approach. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process. Length 6,7, width 6,7cm

  • Polyamide 3D Printed, brass
  • Butterfly fastening for pierced ears
  • Made in Italy

This design combines 3D technology with an artisanal approach. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass.
  • Butterfly fastening for pierced ears.
  • Made in Italy.

Earrings in Polyamide 3D printed and hand-dyed. Variances of colours and layering are due to the 3D printing, polishing and the artisanal approach.

  • Polyamide 3D Printed, brass.
  • Butterfly fastening for pierced earrings.
  • Made in Italy.

Dreaming about wildlife in the Amazon rain forest? Why not try these drop earrings inspired by the parrots' wings? Earrings in Polyamide 3D printed and hand-dyed. Variances of colours and layering are due to the 3D printing, polishing and the artisanal approach. Length 8cm, with 3cm

  • Polyamide 3D Printed, brass
  • Butterfly fastening for pierced earrings
  • Made in Ital
Weight
10,5 grams a couple
Materials
Polyamide, brass Polyamide, brass Polyamide, brass Polyamide, brass

Product Comments

Comments (0)