• On sale!
  • -30%
  • Save 30%

Little Feather earrings, safe green

€30.00
€21.00 Save 30%
Tax included Shipped within 2-5 days

Earring in Polyamide 3D printed and hand-dyed. This design combines 3D technology with an artisanal approach. Inspired by a travel in the past where old forgotten items like Venetian lace s and embroideries have gone through the mutation of the time. Variances of colours and layering are due to the 3D printing, polishing, dyeing and hand made finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy
Size Guide
Size Guide
CLOTHES
MEASUREXS/34S/36M/38-40L/40-42
UK681012
USA46810
FRA36384042
Waist (cm)64687276
Chest (cm)81858993
Seat (cm)899397101
Inseam (cm)81828384


SHOES
FOOT IN INCHESFOOT IN CMUSAEuroUK
23.56395
24.16.539.55.5
24.87.5406
1025.48417
10¼25.78.541.57.5
10½269428
10¾27.39.542.59.5

How to Take Clothing Measurements

  1. Get a flexible measuring tape. These are often sold in craft stores
  2. Neck:
    • Measure around the base of the neck in inches.
    • Round up to the nearest half inch.
  3. Chest:
    • Wrap tape measure under armpits around fullest part of chest (usually right above nipples
  4. Sleeve:
    • Bend your elbow and rest your hand on your hip.
    • Have someone measure from the middle of the back of your neck to your wrist by putting the tape measure over your shoulder, around your elbow and to your wrist.
  5. Waist:
    • Wrap tape measure around where you normally wear your pants. Keep tape measure a little loose by keeping a finger between the tape measure and your waist.
  6. Inseam:
    • Put on a pair of shoes.Have someone measure from your crotch to back of the heel, where you want your pants to end.
  7. Hands:
    • Measure around the hand at the fullest part (exclude thumb). The number of inches shows the size of the glove.
Colours
  • Safe Green
Quantity
  Last items in stock

100% secure payments

Product Details

FW16 ER-08 Safe Green
2 Items

Data sheet

Weight
3,8 grams a couple
Materials
Polyamide, brass

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Quick Compare

Product
Orecchini Fiocco, deep red Circle Venice earrings ER-01 ANIMA 3D printed fashion bijoux Circle Venice earrings, anima Circle Venice earrings ER-01 BLUE 3D printed fashion bijoux Circle Venice earrings, blue Merletto earrings ER-12 ANIMA Paolin fashion custom jewellery Merletto earrings, anima
Availability
Price
€29.51
€28.69
€28.69
€27.05
Description

Visionary Bow earrings. Fiocco earrings are an everyday signature piece that makes your look unique. It's a visionary interpretation of the bow. Earring butterfly backs in silver-tone brass. This design combines 3D technology with an artisanal approach. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy

Visionary doily design earrings. - This Circle Venice earrings studs punctuate the ear is a contemporary interpretation of the classic doily design. Is an everyday piece that you'll forget to have it on thanks to its super lightweight. This design combines 3D technology with an artisanal approach. Inspired by Teneriffe lace Francesca's family items. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy

Visionary doily design earrings. - This Circle Venice earrings studs punctuate the ear is a contemporary interpretation of the classic doily design. Is an everyday piece that you'll forget to have it on thanks to its super lightweight. This design combines 3D technology with an artisanal approach. Inspired by Teneriffe lace Francesca's family items. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy

EVERYDAY EARRINGS. Variances of colours and layering are due to the 3D printing, polishing and the artisanal approach.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy
Weight
2,5 grams a couple 3,6 grams a couple 3,6 grams a couple 3,09 grams a couple
Materials
Polyamide, brass Polyamide, brass Polyamide, brass Polyamide, brass

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Shipping costs in Euro (VAT included)

SHIPPING COUNTRY

Up to 150 €

Between 150 € and 350 €

Over 350 €

ITALY 7 € 0 € 0 €
EUROPE EU 15 € 5 € 0 €
EUROPE NON-EU 15 € 5 € 0 €
NORTH AMERICA 20 € 10 € 0 €

Quick Compare

Product
Orecchini Fiocco, deep red Circle Venice earrings ER-01 ANIMA 3D printed fashion bijoux Circle Venice earrings, anima Circle Venice earrings ER-01 BLUE 3D printed fashion bijoux Circle Venice earrings, blue Merletto earrings ER-12 ANIMA Paolin fashion custom jewellery Merletto earrings, anima
Availability
Price
€29.51
€28.69
€28.69
€27.05
Description

Visionary Bow earrings. Fiocco earrings are an everyday signature piece that makes your look unique. It's a visionary interpretation of the bow. Earring butterfly backs in silver-tone brass. This design combines 3D technology with an artisanal approach. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy

Visionary doily design earrings. - This Circle Venice earrings studs punctuate the ear is a contemporary interpretation of the classic doily design. Is an everyday piece that you'll forget to have it on thanks to its super lightweight. This design combines 3D technology with an artisanal approach. Inspired by Teneriffe lace Francesca's family items. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy

Visionary doily design earrings. - This Circle Venice earrings studs punctuate the ear is a contemporary interpretation of the classic doily design. Is an everyday piece that you'll forget to have it on thanks to its super lightweight. This design combines 3D technology with an artisanal approach. Inspired by Teneriffe lace Francesca's family items. Variances of colours and layering are due to the 3D printing, polishing, dyeing and handmade finishing process.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy

EVERYDAY EARRINGS. Variances of colours and layering are due to the 3D printing, polishing and the artisanal approach.

  • Polyamide 3D Printed, brass
  • Butterfly fastening for piercing earrings
  • Made in Italy
Weight
2,5 grams a couple 3,6 grams a couple 3,6 grams a couple 3,09 grams a couple
Materials
Polyamide, brass Polyamide, brass Polyamide, brass Polyamide, brass

Product Comments

Comments (0)